Why does furniture in a furniture store look so good, but not at home? Why is the atmosphere of a high-end restaurant always so good? All of this is inseparable from lighting, and you have to understand that all commercial scenes spend a lot of money on lighting design. So how can we make the lighting in our home ambience for a small amount of money? Teach everyone in three minutes, please like and collect. When you buy a lamp, turn it out and take a look.

1. Determine the brightness of the space

Taking common LED lights as an example, most of the space in the home is enough for two meters per square meter. The space for writing and reading needs to be seven watts per square meter, but for the elderly, the general activity area should be around four watts per square meter. And it needs nine watts of brightness per square meter.

The brightness of the bedroom can also be appropriately reduced. Therefore, according to the number of square meters of each space in the home, the wattage of the lamps should be reasonably planned.

2. Color rendering of lamps

Why is it that the furniture in the furniture store looks good, but it changes when you go home? This is the problem of color rendering, the higher the color rendering, the higher the degree of color reproduction, and the more realistic it will look.

The lights used in the store are all highly color-rendering, and the effect is of course good. It is recommended to choose Ra greater than 90, R0 greater than 0, and R0 greater than 0 for home use.

3. Color temperature

Most businesses will only ask you whether you want warm light or white light, in fact, color temperature is very important, in short, the lower the color temperature value, the warmer yellow, the higher the cooler white. The color temperature is different for different spaces.

It is better to choose 3000k to 0k in the living room, which is brighter, and 0k to 0k in the dining room helps to increase appetite. The bedroom can choose about 0k, the light is soft, and people sleep more soundly.

But the color temperature of the same continuous space should not be too different, otherwise the space will appear cluttered.

4. Strobe

Strobe refers to the continuous fluctuation of light in a switching cycle, which is manifested as the rapid change of light source over time, and long-term strobe light will affect people's mood and make people anxious. So how can you buy flicker-free lamps?

In fact, any artificial light source under alternating current is strobe, but as long as the frequency and fluctuation of flickering are within the corresponding range, it is qualified and safe, under normal circumstances, as long as the lamp has passed the national 3C and CQC certification, there is basically no problem with strobe.

5. Style

Don't buy complicated lamps, I guess you must have seen bells and whistles, it looks okay, and you can look at it after a long time, it's too easy to go out of style. When the time comes, don't question your original aesthetic. When choosing lamps and lanterns, you should choose a lamp with a strong sense of simple design on the premise of suiting your own home style. Comparatively less likely to become obsolete.

6. Purchase channels

As an individual consumer, online shopping for lamps and lanterns is the first choice, and the cost of physical stores because of rent, freight, labor costs, etc. is definitely higher than online. When the retail arrives in your hands, it is normal to be one or two times more expensive than online, and it is cheap and convenient to buy online.

Lighting design is an easy to ignore but very important link, it is definitely not as simple as buying a few lamps in a gourd painting, if you have a large area in your home, and want to make a variety of lighting scenes, to achieve the atmosphere of lighting. That's still to find a professional design studio.